Fit or replace battery part no. (Cross refer or compatible)
FURUNO BP-1208 FM-8 Lithium Primary battery pack
FURUNO BP-1208 battery pack
Fit or replace product model: (Cross refer or compatible)
Furuno GMDSS FM-8 VHF two-way radiotelephone battery
Furuno GMDSS FM-8 Lithium battery

Wet Sounds 6 Conductor Speaker/RGB Combo Wire
⚡ Wiring is an essential component often neglected during installation. Designed to meet CEA-2015 and BC-5W2 marine compliance standards, the Wet Sounds 6 Conductor Speaker/RGB Combo Wire combines two 12-gauge speaker conductors and four 22-gauge RGB wires in a flexible PVC jacket.
📏 Length: 150 ft (45.72 m)

Specifications:
Speaker Wire (2 conductors - 12-gauge):
Red: Positive (+)
Black: Negative (-)

RGB Wire (4 conductors - 22-gauge):
Red: Red Illumination
Green: Green Illumination
Blue: Blue Illumination
Black: 12V+

Key Features:
✔ Tinned, oxygen-free copper core for superior signal transmission
✔ Quad-shielded design eliminates interference
✔ Designed for marine environments
✔ Flexible & easy to install

Perfect for your boat’s audio & lighting system!

The Easiest Audio Solution for 2017+ Can-Am Defender MAX: 600W 5-Speaker Audio Roof

Introducing the 600W 5-Speaker Audio Roof — the ultimate audio solution for your 2017+ Can-Am Defender MAX! This system is designed to deliver powerful audio in a rugged roto-mold construction while making installation easier than ever. Not only does this roof offer impressive sound, but it also provides additional lighting where it's needed most, thanks to the front and rear LED light bars and an interior cabin LED light.

With its exclusive XZ grille design, integrated RGB lighting can be easily controlled through the WWX-RGB-RS rocker switch. The new AR-5 Defender MAX Roof version features a flush-mounted WS-MC-2 media center, four 8-inch coaxial speakers, one 12-inch subwoofer, a 4-channel amplifier, and an amplifier blank for the optional AR-AMP 2CH to expand your audio system.

The optional AR-AMP 2CH is the perfect addition to connect extra RECON 6 Pods, ICON8 Pods, or REV8 Pods, enhancing your audio experience. Installation is quick and simple, thanks to the pre-wired power/ground harness, so you can get back on the trails and enjoy your favorite tracks.

Note: Does not fit Limited MAX models without the AR-5 Defender Limited Door Hinge Kit.

Specifications:
- Compatibility: Can-Am Defender MAX 2017+
- Speaker System: 5 speakers — four 8" coaxial speakers and one 12" subwoofer
- Media Center: WS-MC-2
- Amplifier: 4-channel, 600W
- LED Lighting: Front, rear, and cabin
- RGB Lighting: Integrated in the new XZ grille
- LED Lighting Switch: 3-position Carling Rocker Switch
- Power On/Off Switch: 2-position Carling Rocker Switch
- RGB Lighting Switch: WWX-RGB-RS

The 600W 5-Speaker Audio Roof is not only a solution for powerful audio but also adds style and lighting features to your Can-Am Defender MAX. It is the ideal choice for adventure enthusiasts who want to elevate their outdoor entertainment experience.

The Wet Sounds HTM Series Amplifiers are the ultimate solution for extreme audio needs. Designed with precision and built for performance, the HTM Series uses Class-D power supplies to deliver high efficiency and extreme power output, all in a compact and stylish design. These amplifiers are engineered to handle the toughest environments, ensuring outstanding durability and reliable performance.

With full-range audio capability, the HTM amplifiers provide clear and detailed sound across all frequencies. The selectable crossovers — high-pass, low-pass, and full-range — allow you to tailor your audio experience to your preference. Installation is made simple with removable power and speaker connectors, and the blue LED back-lit badge not only adds style but also indicates power status.

Compared to previous HTX models, the HTM Series has a lower profile, making it easier to fit in tight spaces without compromising performance. The flexible badging can be mounted horizontally or vertically, and the optional mounting feet provide more installation options.

Whether you're an audiophile craving top-quality sound or need a reliable amplifier for extreme applications, the Wet Sounds HTM Series Amplifier is the ideal choice. Experience a perfect balance of power, performance, and convenience — upgrade your audio system today!

Specifications:
Channels: 4
RMS Power @ 4Ω Stereo: 85W x 4
RMS Power @ 2Ω Stereo: 150W x 4
RMS Power @ 4Ω Bridged: 300W x 2
Adjustable Crossover Range: 50 Hz - 500 Hz
Signal-to-Noise Ratio: 95dB (A-weighted, max output)
Frequency Response (-3dB): 20 Hz - 20 kHz
Input Sensitivity: 350 mVrms - 6 Vrms
Subsonic Filter (CH. 3/4): 10 Hz - 55 Hz
Selectable Crossover: Full / High-Pass (HP) / Low-Pass (LP)
IP Rating: IPX5 (Water-resistant for outdoor use)

Upgrade to the Wet Sounds HTM Series Amplifier and enjoy a new level of sound performance!

Take your adventure even further with the JEEP-JL-LVL2-T kit, whether you enjoy riding around topless or with a hardtop, the Jeep Tower Kit for your 2018-2013 Jeep Wrangler hardtop is the perfect addition to our JEEP-JL-LVL1-C package. Designed and engineered for factory fit & finish and features a plug-and-play wire harness, installation mounts and hardware, (1) pair of REV 12 HD HLCD Tower Speakers with XZ-B grilles and TC3-SXM mounting clamps with a SYN-DX4-DSP-OE pre-tuned amplifier that will provide you with the best sounding experience possible for 800W of clean & loud sound.
Design: All pieces were meticulously engineered to flow with the OE fit & styling. Mounting plates for the tower speakers sit nicely in factory locations. With the included TC3-SXM mounts, you can easily adjust your speaker’s direction, or simply remove for storage or heavy trail riding to avoid damage.
Tower Speakers: The Revolution-HD series adds an even higher level of high-definition performance to the audio industry, bringing unprecedented volume and sound quality to a tower speaker design never achieved before. Built upon the success of the Revolution Series, we developed a new REV TEC™ driver using proprietary materials to provide amazing mid-bass with a smooth yet powerful high frequency response. The REV HD Horn Loaded Compression Driver (HLCD) Tower Speakers have been optimized with audio clarity and high performance at their core. They both feature a Pro-Axial HLCD driver paired with an advanced polymer composite cone for audio clarity and durability. The thermoformed Santoprene™ rubber surround, matched with the injection molded reinforced enclosure, ensures optimal listening in any marine setting. The integrated RGB lighting rings and badge add a nice touch of style, perfect for ambient lighting on the trails.
Power: To get the best sound, you need the best power. Included is a SYN-DX4-DSP-OE amplifier that is pre-tuned to deliver 800W of power to your REV 12 HD tower speakers, eliminating the need for any tuning or adjustment of the amplifier. Mounting is simple, with pre-drilled locations on the sub mounting plate next to core kit amp, your amp will sit nicely tucked away out of site under the enclosure. Also included is a 100A mini ANL fuse for your WWX-FUSE DIST BLOCK under the hood.

Installation: We wanted this kit to be a clean, simple solution, so we incorporated a plug-and-play factory style wiring harnesses that plug right in to your speakers, amp, distribution block, and battery saving you time and labor from cutting and terminating. RGB lighting for the towers is built into the harness and controlled thru the ZENGGE app, available on google play and apple app store.

Illuminate the Night with ZR LED Rings

Elevate your audio experience with the cutting-edge ZR LED Rings, designed to bring brilliance and style to any setup. With the power to choose from millions of vibrant colors, you can create the perfect ambiance for any mood or environment.

Crafted from premium materials and engineered for seamless integration between your speaker and mounting surface, these LED rings redefine sophistication while enhancing your audio system’s aesthetics.

✨ Features:
✔ Pre-installed LEDs for effortless installation
✔ Available in multiple sizes: 6.5" & 8" pairs, 10" & 12" singles
✔ Flawless accent lighting to complement any setup

🚨 RGB Controller Required (Not Included)
Compatible with WWX-RGB-RS, RF-RGB-MC V2 & WS-4Z RGB Controllers.

Light up your world—experience the future of LED accent lighting with ZR LED Rings!

Get ready to light up the night with the all-new ZR LED Rings! Experience the power to choose from millions of colors, creating the perfect accent lighting for any mood or environment. These rings are crafted from premium materials and engineered for seamless integration between your speaker and mounting surface, bringing a new level of sophistication and style to your audio system.

ZR LED Rings come with pre-installed LEDs and are available in multiple sizes:
6.5" & 8" pairs
10" & 12" singles

Note: An RGB Controller is required (not included). Compatible with WWX-RGB-RS, RF-RGB-MC V2, and WS-4Z RGB Controllers.

Elevate your experience and make a statement with ZR LED Rings!

🔊 Powerful, Marine-Ready Bass
The REVO V3 Series subwoofers are designed to deliver exceptional performance in harsh marine environments. Built with a Nylas™ Composite Frame, they resist corrosion, water, temperature changes, and UV exposure, ensuring long-lasting durability.

⚡ High-Performance Engineering
✔ Injection Molded Composite Cone – Ensures low distortion & durability
✔ Santoprene™ Rubber Spider – Superior water & temperature resistance compared to traditional cotton spiders
✔ Santoprene™ Rubber Surround – Stronger bonding to the cone, preventing water & UV damage
✔ Stainless Steel Terminals – Corrosion-resistant for reliable performance
✔ Enhanced Rear Venting – Improves cooling & efficiency

🔹 HP Model Advantages
✔ Optimized for Ported Enclosures – Delivers deep, powerful bass
✔ Higher Power Handling compared to FA models
✔ Available in Black with Single 4Ω Impedance

🌈 Customizable LED Lighting
Optional RGB LED Kits available to install under all REVO 10” & 12” subwoofer grilles, allowing endless LED light combinations to match your setup.

⚠ Grille not included (sold separately)

🎶 Marine-Grade Durability – High-Performance Sound – Customizable Experience!

Powerful Bass, Built for Marine Environments
The REVO V3 Series subwoofers are designed to deliver exceptional low-end performance, even in harsh marine conditions. Featuring a Nylas™ Composite Frame, these subwoofers are highly resistant to corrosion, water, temperature changes, and UV exposure—ensuring long-lasting durability.

⚡ Durability & Performance Combined
✔ Injection Molded Composite Cone – Ensures low distortion & durability
✔ Santoprene™ Rubber Surround & Spider – Resists water & UV damage
✔ Rear Venting Enhancements – Improves cooling & efficiency

🔹 Model Advantages
✔ Optimized for Ported Enclosures – Delivers deep, powerful bass
✔ High Power Handling
✔ Single 4Ω Impedance for efficient system integration

Specifications
✅ Size: 12” Subwoofer
✅ Peak Power Handling: 600W
✅ RMS Power Handling: 300W
✅ Impedance: 4Ω (Single Voice Coil)
✅ Frequency Response: 20 - 200 Hz
✅ Sensitivity: 85 dB
✅ Design: Round / Circle
✅ Main Cone Color: Black
✅ Composition: Injection Molded Polypropylene Composite
✅ Surround Material: Santoprene™ Rubber
✅ Magnet Structure: Single Stacked

⚠ Grille not included (sold separately)

🎶 Deep, Clear, and Durable – The Ultimate Marine Subwoofer!

REVO Free Air Subwoofer – High Performance Sound
The REVO Free Air (FA) subwoofer is specifically designed for Infinite Baffle (Free Air) applications – ideal when a dedicated subwoofer enclosure is unavailable or impractical.

🔹 Available Sizes: 10” & 12”
🔹 Frame Color: White or Black (Black frames feature metallic grey cones)
🔹 Impedance: 2Ω or 4Ω

KEY FEATURES:
✅ Nylas Composite Frame: Withstands harsh environmental conditions, designed to accept optional RGB wiring.
✅ Injection-Molded Composite Cone: Durable, low distortion.
✅ Santoprene™ Rubber Spider: More durable to water and temperature changes compared to traditional cotton spiders used in most marine speakers and subwoofers.
✅ Santoprene™ Rubber Surround: Offers superior bonding to the composite cone. Also resists deterioration from water, temperature, and UV exposure.
✅ Stainless Steel Terminals: Resistant to corrosion, ensuring reliable connections.

TECHNICAL SPECIFICATIONS:
✔ Series: REVO
✔ Subwoofer Size: 12"
✔ RMS Power: 400W
✔ Peak Power: 800W
✔ Impedance: 2Ω
✔ Frequency Response: 20Hz – 400Hz
✔ Sensitivity: 88 dB @ 1W/1m
✔ Hole Cutout Size: 11.26” (286.0 mm)
✔ Mounting Depth: 4.92” (124.96 mm)
✔ Diameter with Grill: 12.6” (320.04 mm)
✔ Weight: 15 lbs (6.80 kg)
✔ Box Specs: Optimized for Infinite Baffle (Free Air) or 1.3 cu ft sealed enclosure
✔ Cone Color: Black
✔ Application Type: Free Air

Powerful bass performance – The perfect choice for your marine, powersports, or open space sound system!

REVO High Power Subwoofers – Powerful Bass for Sealed or Ported Enclosures
The REVO High Power (HP) subwoofers are designed for applications where there is sufficient space for a specifically built sealed or ported subwoofer enclosure. They deliver exceptional bass performance, making them an ideal choice for your sound system.

🔹 Available Sizes: 10” & 12”
🔹 Impedance: 4Ω
🔹 Frame Color: Black with metallic grey cones

KEY FEATURES:
✅ Sealed or Ported Enclosures: Optimized for both, with a minimum of 1.0 cu ft sealed or 1.3 cu ft ported enclosures.
✅ Sold Without Grills: 8 different grill designs are available separately for REVO HP & FA Subwoofers and can be matched with REVO Coaxial In-Boat Speakers.
✅ Optional RGB LED Kits: Available to add under all REVO 10” & 12” subwoofer grills, allowing for thousands of LED display combinations to enhance your audio setup.

TECHNICAL SPECIFICATIONS:
✔ Series: REVO
✔ Subwoofer Size: 10"
✔ RMS Power: 400W
✔ Peak Power: 800W
✔ Impedance: 4Ω
✔ Sensitivity: 88 dB @ 1W/1m
✔ Frequency Response: 20Hz – 500Hz
✔ Hole Cutout Size: 9.45” (240.03 mm)
✔ Mounting Depth: 4.72” (119.88 mm)
✔ Diameter with Grill: 11.02” (279.90 mm)
✔ Weight: 8.1 lbs (3.67 kg)
✔ Box Specs: Minimum 1.0 cu ft sealed or 1.3 cu ft ported enclosure
✔ Cone Color: Black with Gray Cone
✔ Application Type: Sealed or Ported Enclosure

Ideal for custom installations – bring your system to life with deep, clear bass!

REVO V3 Series Marine Subwoofers – Engineered for Superior Performance!
The REVO V3 Series subwoofers are built to excel in marine environments, offering high-performance bass while withstanding harsh conditions.

Key Features:
✔ Nylas™ Composite Frame: Corrosion-resistant and designed for extreme environmental durability.
✔ Injection Molded Composite Cone: Ensures long-lasting performance with minimal distortion.
✔ Santoprene™ Rubber Surround & Spider: Provides superior resistance to water, temperature changes, and UV exposure for long-lasting bass quality.
✔ Enhanced Rear Venting: Improves airflow and overall subwoofer performance.
✔ Multiple Impedance Options: Available in single 2Ω or single 4Ω versions.
✔ Grille Not Included: Sold separately.

Technical Specifications:
🔹 Subwoofer Size: 10”
🔹 Power Handling (RMS/PEAK): 300W | 600W
🔹 Impedance Options: 4Ω
🔹 Frequency Response: 20Hz – 200Hz
🔹 Sensitivity (@1W/m): 85dB
🔹 Voice Coil Size: 2.5”
🔹 Hole Cut-Out Diameter: 9.45” (240.03mm)
🔹 Mounting Depth: 4.62” (117.35mm)
🔹 Weight: 14 lbs (6.35 kg)
🔹 Application Type: Free Air
🔹 Enclosure Specs: Optimized for Infinite Baffle (Free Air) applications or 1.3 cu ft sealed enclosure

Delivers deep, powerful bass with durability built for the open water!

The REVO Free Air (FA) subwoofer is specifically designed for Infinite Baffle (Free Air) applications, where a dedicated subwoofer enclosure is unavailable or impractical.

Options & Variants:
🔹 Sizes: 10” & 12”
🔹 Colors: White or Black (Black frames feature metallic gray cones)
🔹 Impedance: Available in 2 Ohm or 4 Ohm versions

Key Features:
✔ Nylas Composite Frame: Built to withstand extreme environments and supports optional RGB lighting wiring.
✔ Injection-Molded Composite Cone: Ensures durability and minimizes distortion.
✔ Santoprene Rubber Spider: More resistant to water and temperature changes than traditional cotton-treated spiders found in most marine speakers & subwoofers.
✔ Santoprene Rubber Surround: Provides a superior bond to the cone while resisting water, heat, and UV damage.
✔ Stainless Steel Terminals: Corrosion-resistant and long-lasting.

💡 Notes:
✅ All REVO subwoofers are sold without grills. There are 8 different grill designs (sold separately) to match REVO In-Boat Coaxial Speakers.
✅ Optional RGB LED Kits are available for all REVO 8", 10", and 12" subwoofers, enabling thousands of LED lighting display combinations.

Technical Specifications:
🔸 Mounting Depth: 4.62” (117.47mm)
🔸 Frequency Response: 20Hz – 500Hz
🔸 Sensitivity: 88dB @ 1W/1m
🔸 Overall Diameter: 11.02” (279.90mm)
🔸 Weight: 10 lbs (4.53 kg)
🔸 RMS Power Handling: 300W
🔸 Peak Power Handling: 600W
🔸 Impedance: 2 Ohm
🔸 Cutout Diameter: 9.45” (240.03mm)
🔸 Enclosure Specs: Optimized for Infinite Baffle (Free Air) applications or 1.3 cu ft sealed enclosure
🔸 Series: REVO
🔸 Cone Color: Black
🔸 Application Type: Free Air

Delivers deep, powerful bass without requiring a dedicated subwoofer enclosure!

Wet Sounds REVO FA Series – Free Air Marine Subwoofers

The REVO FA (Free Air) Series subwoofers are designed for Infinite Baffle (Free Air) applications, making them ideal for installations without a dedicated subwoofer enclosure.

⚡ Premium Marine-Grade Construction
✔ Nylas™ Composite Frame – Corrosion-resistant & compatible with optional RGB lighting
✔ Injection Molded Composite Cone – Durable & low distortion for clear bass response
✔ Santoprene™ Rubber Spider – More resilient to water & temperature changes than traditional cotton spiders
✔ Santoprene™ Rubber Surround – Superior bonding, water & UV-resistant
✔ Gold-Plated Terminals – Prevents corrosion in harsh marine environments

🎨 Color & Size Options
✔ Available in Black or White frames (Black models feature metallic grey cones)
✔ Sizes: 8”, 10”, & 12”
✔ REVO-8FA model: Single 4Ω impedance

⚠ Grilles Sold Separately
✅ 8 unique grille designs available for matching REVO Coaxial In-Boat Speakers & REVO Subwoofers

🎶 Powerful Bass – Built for the Elements – No Enclosure Required!

Discover the Wet Sounds ZERO XY Series Marine Coaxial Speakers

Experience maximum output and superior sound with the Wet Sounds ZERO XY Series—engineered for exceptional performance on the water. Designed for boats, yachts, and marine adventures, these shallow-mount, high-power speakers bring crystal-clear audio to any open-air environment.

🔹 Key Features:
🎵 Shallow Mount Design – Optimized for tight spaces while delivering powerful, high-quality sound.

🔧 Twist-Lock Grille Installation – A sleek, low-profile design that hides mounting hardware for a seamless, professional look.

🌊 Marine-Grade Durability – Crafted with corrosion-resistant aluminum and powder-coated finishes, built to withstand New Zealand’s coastal saltwater conditions.

💪 Innovative Nylas Composite Material – A nylon and fiberglass blend that enhances strength and stability, ensuring longevity in New Zealand’s rugged maritime environment.

🔊 High-Power Sound Performance – Featuring oversized Neo motors and horn-loaded tweeters, these speakers deliver crisp, clear audio, even in open-air settings.

Set sail with premium marine sound quality—Upgrade your vessel with the Wet Sounds ZERO XY Series today!

Premium Marine Audio Performance
Enhance your boating experience with Wet Sounds ZERO Series, designed for exceptional sound clarity, durability, and power in marine environments.

⚙️ Features:
▪ Twist-lock grille – Sleek, flush finish
▪ Shallow mount – Flexible installation options
▪ Corrosion-resistant aluminum – Built for harsh conditions
▪ High power handling – Oversized Neo motors
▪ Marine-optimized – Durable & long-lasting

🔗 Perfect Pairing:
✔ ZERO XY 10 Grille-W + ZERO 10 S4 XZ-W (10" 4Ω High-Output Sealed Enclosure Subwoofer)
🎵 Deep bass & superior audio performance

Wet Sounds REVO XZ Grille Kit – Exclusive Design for REVO Subwoofers
We've taken our most popular grille style and made it available for REVO Series subwoofers. Introducing the REVO XZ Grille Kit, designed exclusively for REVO subwoofers.

✔ Bold & modern XZ design for a stylish upgrade
✔ Available in Black & White to match your setup
✔ Includes XZ grille, mounting ring, and rubber gasket for easy installation

Enhance your REVO subwoofers with the XZ Grille Kit for a premium, sleek finish!